Brasseler KM172-24-62S Smooth Kirschner Wire Double Trocar 0.062 Inch x 4.0 Inch - New

Peter Brasseler KM172-24-62S Smooth Kirschner Wire (K-Wire) | 0.062 Inch (1.6 mm) Outer Diameter | 4.0 Inch (101.6 mm) Length | Double Trocar 3-Sided Point | 316L Stainless Steel | New

Expiration: 2030-11-14

The Peter Brasseler KM172-24-62S Smooth Kirschner Wire (K-Wire) is a precision-ground, high-rigidity structural pinning and mechanical alignment rod engineered for orthopaedic bone surrogate fixation, mechanical axial guidance, material penetrometry testing, and structural joint modeling. Featuring a 0.062 inch (1.6 mm) nominal outer diameter and a 4.0 inch (101.6 mm) overall length, this component is precision-machined from 316L implant-grade stainless steel (ASTM F138) to provide high yield strength, minimal axial flexing, and superior chemical resistance. The dual-ended Double Trocar configuration features 3-sided ground cutting points at both extremities, allowing reversible penetration, bi-directional chucking, and rapid insertion into high-density synthetic substrates or test fixtures. It serves as an ideal component for mechanical load testing, drill guidance calibration, orthopaedic technique demonstrations, and laboratory research setups.

Product Details

• Brand / Manufacturer: Peter Brasseler USA® Surgical
• Part / Catalog Number: KM172-24-62S
• Product Line: Smooth K-Wire Series
• Product Type: Kirschner Wire (K-Wire) / Mechanical Alignment Rod
• Outer Wire Diameter: 0.062 Inches (1.6 mm)
• Overall Length: 4.0 Inches (101.6 mm)
• Point Geometry / Tip Configuration: Double Trocar (3-Sided Ground Point on Both Extremities)
• Surface Finish: Smooth / Precision-Ground Centerless Finish
• Material Composition: 316L Stainless Steel (ASTM F138 Grade)
• Quantity Included: 1 Unit per Sterile Pouch (or per selected listing variation)
• Unit of Measure: 1 Each (1/EA)
• Application: Mechanical guidance testing, orthopaedic surrogate fixation, drill path alignment, substrate penetration analysis, and research laboratory setups
• Condition: Brand New — Unused, factory sealed in original packaging.

Key Features

• Fabricated from 316L medical-grade stainless steel to ensure exceptional torsional stability and bending resistance
• Precision centerless grinding maintains tight dimensional tolerances across the entire 4.0 inch shaft length
• Double Trocar 3-sided points enable bi-directional driving efficiency in rotational power tool fixtures
• Smooth cylindrical surface reduces frictional resistance during insertion and extraction from dense media
• Fully compatible with standard Jacobs chucks, wire drivers, and precision orthopaedic drilling instrumentation