Zimmer 2360-11-02 Reduction Sleeve 3.5/2.7mm Orthopedic Preowned

Zimmer 2360-11-02 Reduction Sleeve 3.5/2.7mm Orthopedic Preowned

Specifically designed for use within Zimmer Biomet’s Small Fragment and Periarticular Locking Systems, this reduction sleeve acts as a concentric spacer.

Technical specifications

• Brand: Zimmer
• Reference / model: 2360-11-02
• Model: / REF: 2360-11-02
• Material: Medical-Grade Surgical Stainless Steel

Additional product details

• By bridging the gap between 3.5mm and 2.7mm instrument footprints, the 2360-11-02 provides the "telescoping" accuracy required for lag-screw techniques and fixed-angle plating where even a sub-millimeter deviation in the pilot hole can compromise the mechanical integrity of the locking construct.
• Manufacturer: Zimmer Biomet
• Product Type: Reduction / Centering Sleeve
• Outer Diameter Compatibility: 3.5mm Systems
• Inner Diameter Compatibility: 2.7mm Instrumentation
• Configuration: Cannulated / Nested Guide
• Cleaning: Fully Autoclavable / Reusable
• Concentric Alignment Precision: The 2360-11-02 eliminates "drill wander" when transitioning between different screw sizes.
• This allows for rapid intraoperative adjustments without switching out entire drill guide assemblies.
• Low-Profile Surgical Access: The slim, knurled-top design allows for easy manual insertion and removal from drill guides, even when used deep within soft-tissue corridors or under fluoroscopic guidance.
• Orthopedic Trauma: Internal fixation of distal radius, fibula, and humerus fractures.
• Periarticular Plating: Centering 2.7mm screws within 3.5mm locking plate holes for multi-fragment stabilization.
• Lag Screw Technique: Preparing the "pilot hole" component of a 3.5mm/2.7mm lag screw construct.
• Small Fragment Reconstruction: Any procedure requiring nested instrumentation within Zimmer's Universal Locking System (ULS).
• Status: Used – Good Usable Condition.
• Maintenance: This instrument shows visible signs of professional use (minor surface scuffs or cosmetic wear consistent with standard tray storage and repeated autoclaving), but it remains fully functional. The internal lumen is clear and unobstructed, the 3.5/2.7mm tolerances are factory-spec, and the stainless steel is free of pitting.

Condition

Preowned.